PID/DATA MONITOR TABLE
id080200320300
|
PID name (definition) |
Unit/Operation |
Operation Status (Reference) |
Terminal |
|
|---|---|---|---|---|
|
BUCKLE_D
(Driver-side buckle switch status)
|
Buckled/Unbuckled
|
• Driver-side front seat belt fastened (Driver-side buckle switch off): Buckled
• Driver-side front seat belt not fastened (Driver-side buckle switch on): Unbuckled
|
2M
|
|
|
BUCKLE_P
(Passenger-side buckle switch status)
|
Buckled/Unbuckled
|
Occupant seated in passenger-side front seat: On
|
• Passenger-side front seat belt fastened (Passenger-side buckle switch off): Buckled
• Passenger-side front seat belt not fastened (Passenger-side buckle switch on): Unbuckled
|
2O
|
|
P_BELT_SSR
(Occupancy sensor status)
|
On/Off
|
Passenger-side buckle switch: On
|
• Occupant seated in passenger-side front seat (occupancy sensor on): On
• Occupant not seated in passenger-side front seat (occupancy sensor off): Off
|
2O
|
|
PAD_SW
(PAD switch status)
|
On/Off
|
• PAD switch is at PASS AIRBAG ON position: On
• PAD switch is at PASS AIRBAG OFF position: Off
|
3H, 3F
|
|
|
PAD_SW_FLT
(PAD switch malfunction status)
|
O.K./Fault
|
• PAD switch normal: O.K.
• PAD switch abnormal: Fault
|
3H, 3F
|
|
|
RES_AB_D
(Driver-side air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
3E, 3G
|
|
|
RES_AB_P
(Passenger-side air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
3I, 3K
|
|
|
RES_CAB_D
(Driver-side curtain air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
1I, 1K
|
|
|
RES_CAB_P
(Passenger-side curtain air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
1M, 1O
|
|
|
RES_PT_D
(Driver-side pretensioner seat belt resistance nominal)
|
ohm
|
Continuous: 1.5-4.1 ohms
|
2A, 2C
|
|
|
RES_PT_P
(Passenger-side pretensioner seat belt resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
2E, 2G
|
|
|
RES_SAB_D
(Driver-side side air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
1A, 1C
|
|
|
RES_SAB_P
(Passenger-side side air bag module resistance nominal)
|
ohm
|
Continuous: 1.5–4.1 ohms
|
1E, 1G
|
|
|
VPWR
(SAS control module power voltage)
|
V
|
Switch the ignition to ON: B+
|
3A
|
|