BUCKLE SWITCH INSPECTION

id081100803000

Driver Side

Vehicle with seat warmer (European (L.H.D.) specs.)/Vehicle with power seat (Except european (L.H.D.) specs.)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00001006

•  If not as indicated in the table, replace the front buckle.

am6zzw00001007

Vehicle without seat warmer (European (L.H.D.) specs.)/Vehicle without power seat (Except european (L.H.D.) specs.)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00001008

•  If not as indicated in the table, replace the front buckle.

am6zzw00001009

Passenger Side

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00001006

•  If not as indicated in the table, replace the front buckle.

am6zzw00001007

Rear Side (Left, Center)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00001010

•  If not as indicated in the table, replace the rear buckle.

am6zzw00001011

Rear Side (Right)

1.  Switch the ignition to off.

2.  Disconnect the negative battery cable.

3.  Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.  Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION.)

5.  Inspect for continuity between the buckle switch terminals using a tester.

am6zzw00001012

•  If not as indicated in the table, replace the rear buckle.

am6zzw00001011