SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)]
id0902e5358000
|
DTC |
Security light flashing pattern |
21 |
Only one key or no key has been programmed |
|
|---|---|---|---|---|
|
M-MDS display |
Instrument cluster |
B10D8:00 |
||
|
PCM |
P1260:00 |
|||
|
POSSIBLE CAUSE
|
Only one key or no key has been programmed
|
|||
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY NUMBER OF PROGRAMMED KEYS
• Using the M-MDS, perform the PID/data monitor inspection and verify the programmed keys.
• Are two or more keys programmed?
|
Yes
|
Replace the instrument cluster and program the immobilizer system-related parts.
Go to Step 3.
|
|
No
|
Program an additional key referring to the immobilizer system-related parts programming.
Go to the next step.
|
||
|
2
|
VERIFY DTCs
• Using the programmed key, switch the ignition to ON.
• Clear DTCs using the M-MDS.
• Verify DTCs using the M-MDS.
• Are DTCs output again?
|
Yes
|
Replace the instrument cluster and program the immobilizer system-related parts.
Go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY AFTER REPAIR
• Clear DTCs using the M-MDS.
• Verify DTCs using the M-MDS.
• Are DTCs output again?
|
Yes
|
Inspect DTC P1260:00.
(See DTC P1260:00 [L8, LF, L5].)
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Verify if other DTCs are displayed.
• Are any other DTCs output?
|
Yes
|
Perform the corresponding DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||