DTC INSPECTION [INSTRUMENT CLUSTER]

id0902e8345400

1.  Connect the M-MDS to the DLC-2.

am6zzw00001790

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Self Test”.

2.  Select “Modules”.

3.  Select “IC”.

•  When using the PDS (Pocket PC)

1.  Select “Module Tests”.

2.  Select “IC”.

3.  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If a DTC is displayed, repair the malfunctioning location according to the corresponding DTC inspection after recording the snap shot data.

Note

•  Snapshot data items are not displayed, according to detected DTC.

Snapshot data item	Data contents	Unit	Display content
TOTAL_DIST	Odometer reading when DTC detected	km	Odometer reading when DTC detected (four-digit number indicated)

4.  After completion of repairs, clear all DTCs stored in the instrument cluster. (See CLEARING DTC [INSTRUMENT CLUSTER].)