STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

id0902f6358300

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1.  Switch the ignition to ACC or ON.

2.  Turn the audio unit power to off.

3.  While pressing the POWER/VOLUME switch, simultaneously press the MEDIA switch and the RPT switch for 2 s or more.

With RDS (radio data system)

am6zzw00002498

Without RDS (radio data system)

am6zzw00003331

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK switch (up or down).

4.  To stop the on-board diagnostic test mode, ignition is switched to off.