STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [CAR-NAVIGATION SYSTEM]

id0902f7358300

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1.  Switch the ignition to ACC or ON.

2.  Turn the audio power to off.

3.  While pressing the POWER/VOLUME switch, simultaneously press the TUNE/AUDIO switch and the DISP switch for 200 ms or more.

With RDS (radio data system)

am6zzw00002263

Without RDS (radio data system)

am6zzw00004087

Note

•  If several DTCs are in the memory, they can be displayed using the UP/DOWN switch.

4.  To stop the on-board diagnostic test mode, ignition is switched to off.