CUSTOMIZED FUNCTION SETTING PROCEDURE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

id0914004397z3

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.

1.  Connect the M-MDS to the DLC-2.

am6zzw00000906

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

1.  Select the “Module Programming”

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Parameters”

2.  Select “RKE”

4.  Select the item name, and then select option.

Items

•  Advanced Keyless Function (Disabled/Enabled)

•  Prevention Function of Key Containment in Trunk or Liftgate (Disabled/Enabled)

•  ACC Auto OFF (Disabled/Enabled)

•  Power OFF Mode (Direct/Stepwise)

•  Advanced Key Battery Low Warning (Disabled/Enabled)

•  Answer Back Buzzer Volume (Disabled/5 - 10)

•  Warning Buzzer Volume (5 - 10)