TRUNK LID LATCH SWITCH INSPECTION

id091400811200

1.  Disconnect the negative battery cable.

2.  Remove the recess. (See RECESS REMOVAL/INSTALLATION.)

3.  Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION.)

4.  Remove the trunk lid latch and lock actuator. (See TRUNK LID LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

5.  Press the latch in using a flathead screwdriver to inspect the latch lever condition.

am6zzw00001894

6.  Verify that the continuity is as indicated in the table.

am6zzw00001895

•  If not as indicated in the table, replace the trunk lid latch and lock actuator.

am6zzw00001896