THEFT-DETERRENT SYSTEM SENSITIVITY SETTING

id091400825600

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the BCM.

1.  Connect the M-MDS to the DLC-2.

am6zzw00002172

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS

•  When using the IDS (laptop PC)

1.  Select “Module Programing”.

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Parameters”.

2.  Select “Security”.

4.  Perform the theft-deterrent system sensitivity setting according to the instructions on the screen.