HANDS-FREE TELEPHONE (HF/TEL) SYSTEM FUNCTION

id092000819600

• The following functions have been adopted.

• Operates by voice recognition/hands-free switch. Refer to the user's instructions for the operation method.

Function

Outline

Callout

Callout using telephone number

Call is made by the user calling out the telephone number.

Callout using telephone book

Call is made by a calling out the name of a person whose telephone number has been registered in the telephone book in advance.

Redialing

Redialing a telephone number previously dialed.

Emergency calls

Calls the emergency “112” number.

Incoming call

Receiving calls

•  Notifies the users that their cellular phone is being called immediately after the incoming call is detected.

•  Call is initiated.

Call rejection

Calls are rejected.

Active call

Mute

Input from the microphone is interrupted during the call.

Transfer

Switches a standard call using a cellular phone to a call using a hands-free phone.

Multiple calls

Call interrupt

•  An additional incoming call can be received during the current one. In this case, the first call is interrupted.

•  Call interrupt can be refused.

Switching calls

•  Press the voice recognition/hands-free switch to switch the call.

―  Voice recognition/hands-free switch (short press): The current call is put on hold.

―  Voice recognition/hands-free switch (long press): The current call is terminated.

Telephone book

Registration

•  Registers telephone numbers to the telephone book in the HF/TEL unit.

•  32 names can be programmed for each language.

•  The telephone numbers of four places (home, work, mobile, pager) can be programmed under one name.

Edit

Correct/change the registered data.

Clear

Clears a single registered data or collectively.

View

Guides the registered data sequentially using voice.

Device pairing/selection

Pairing

•  A maximum of seven Bluetooth applicable cellular phones can be paired.

•  Connection priority ranking and four-digit PIN numbers must be input during pairing.

Clear

Clear the device paired by each device or collectively.

View

Guides the pairedmed devices sequentially using voice.

Setting

Language setting

language used for voice recognition, voice guidance, and display can be selected from three languages (English, German, Italian, French, Dutch, Portuguese, and Spanish).

Password setting/cancellation

•  Password can be set.

•  If a password is set, the HF/TEL system does not operate until it is input.

Confirmation prompt setting

•  Confirms using voice guidance before executing the operation indicated by the user.

•  When it is set to OFF, confirmation guidance is skipped.

Volume

Adjusts the call and voice guidance volumes.

Other

HF/TEL system stop

Stops the HF/TEL system operation.

Voice training

•  Learns features of the voice/pronunciation of the person making the call and improves voice recognition.

•  Voice training for up to one people can be done for each language.

Help

•  When “Help” is called out, the system switches to this function at any step.

•  Guides all executable voice commands.

Diagnosis system

The on-board diagnostic system has a self-diagnostic function and diagnostic assist function to help technicians locate malfunctions.

Function			Outline
Callout	Callout using telephone number		Call is made by the user calling out the telephone number.
	Callout using telephone book		Call is made by a calling out the name of a person whose telephone number has been registered in the telephone book in advance.
	Redialing		Redialing a telephone number previously dialed.
	Emergency calls		Calls the emergency “112” number.
Incoming call	Receiving calls		• Notifies the users that their cellular phone is being called immediately after the incoming call is detected. • Call is initiated.
Incoming call	Call rejection		Calls are rejected.
Active call	Mute		Input from the microphone is interrupted during the call.
	Transfer		Switches a standard call using a cellular phone to a call using a hands-free phone.
	Multiple calls	Call interrupt	• An additional incoming call can be received during the current one. In this case, the first call is interrupted. • Call interrupt can be refused.
	Multiple calls	Switching calls	• Press the voice recognition/hands-free switch to switch the call. ― Voice recognition/hands-free switch (short press): The current call is put on hold. ― Voice recognition/hands-free switch (long press): The current call is terminated.
Telephone book	Registration		• Registers telephone numbers to the telephone book in the HF/TEL unit. • 32 names can be programmed for each language. • The telephone numbers of four places (home, work, mobile, pager) can be programmed under one name.
	Edit		Correct/change the registered data.
	Clear		Clears a single registered data or collectively.
	View		Guides the registered data sequentially using voice.
Device pairing/selection	Pairing		• A maximum of seven Bluetooth applicable cellular phones can be paired. • Connection priority ranking and four-digit PIN numbers must be input during pairing.
	Clear		Clear the device paired by each device or collectively.
	View		Guides the pairedmed devices sequentially using voice.
Setting	Language setting		language used for voice recognition, voice guidance, and display can be selected from three languages (English, German, Italian, French, Dutch, Portuguese, and Spanish).
	Password setting/cancellation		• Password can be set. • If a password is set, the HF/TEL system does not operate until it is input.
	Confirmation prompt setting		• Confirms using voice guidance before executing the operation indicated by the user. • When it is set to OFF, confirmation guidance is skipped.
	Volume		Adjusts the call and voice guidance volumes.
Other	HF/TEL system stop		Stops the HF/TEL system operation.
	Voice training		• Learns features of the voice/pronunciation of the person making the call and improves voice recognition. • Voice training for up to one people can be done for each language.
	Help		• When “Help” is called out, the system switches to this function at any step. • Guides all executable voice commands.
Diagnosis system			The on-board diagnostic system has a self-diagnostic function and diagnostic assist function to help technicians locate malfunctions.