ROTOR BEARING REPLACEMENT

id011000133300

Removal

1.  Set the rotor with the internal gear at the bottom.

2.  Remove the adapter ring and the securing screw from the SST.

be13ze00000022

3.  Remove the rotor bearing using the SST.

Installation

Note

•  Rotor bearing thickness

be13ze00000048

N3A2-11B11 (green^*1): 2.995—3.000 mm {0.1180—0.1181 in}

N3A3-11B11 (black^*1): 2.9975—3.0050 mm {0.11802—0.11830 in}

1.  Remove the SST handle.

be13ze00000023

2.  Temporarily assemble so that the rotor bearing tab and the rotor notch are aligned after pressing in the rotor bearing and rotor.

be13ze00000024

3.  Set the temporarily assembled rotor bearing and rotor on a hydraulic press.

4.  Press in the rotor bearing using the SST.

be13ze00000025