ENGINE TECHNICAL DATA

id015000800100

ITEMS				ENGINE TYPE
				13B-MSP
				STANDARD POWER	HIGH POWER
SIDE HOUSING (FRONT, INTERMEDIATE, REAR) INSPECTION
Maximum distortion			(mm {in})	0.04 {0.0016}
Maximum wear (Vertical wear)			(mm {in})	0.10 {0.0039}
Maximum wear (Convex oval)	(mm {in})	Oil seal inner path		0.01 {0.0004}
		Oil seal outer path		0.10 {0.0039}
Maximum wear (Oil seal stepped path wear)		(mm {in})		0.02 {0.0008}
ROTOR HOUSING
Maximum width difference	(mm {in})			0.06 {0.0024}
ROTOR
Rotor and side housing clearance		(mm {in})	Standard	0.05—0.19 {0.0020—0.0074}
			Maximum	0.05 {0.002}
Protrusion of the rotor round		(mm {in})	Standard	0.12—0.18 {0.0048—0.0070}
			Minimum	0.1 {0.0039}
Apex seal groove and the apex seal clearance		(mm {in})	Standard	0.042—0.077 {0.0017—0.0030}
			Maximum	0.15 {0.0059}
APEX SEAL, APEX SEAL SPRING
Apex seal height		(mm {in})	Standard	5.3 {0.20}
			Minimum	4.3 {0.17}
Apex seal spring height		(mm {in})	Standard	5.4 {0.213}
			Minimum	3.5 {0.148}
CORNER SEAL, CORNER SEAL SPRING
Minimum projection of the corner seal			(mm {in})	0.5 {0.02}
SIDE SEAL, SIDE SEAL SPRING
Corner seal and side seal clearance		(mm {in})	Maximum	0.4 {0.016}
Minimum projection of the side seal			(mm {in})	0.5 {0.02}
CUT-OFF SEAL, CUT OFF SEAL SPRING
Cut-off seal height		(mm {in})	Standard	3.95 {0.1555}
			Minimum	3.8 {0.15}
Minimum projection of the cut off seal			(mm {in})	0.5 {0.02}
OIL SEAL, OIL SEAL SPRING
Maximum contact width			(mm {in})	0.5 {0.02}
Maximum circumferential width			(mm {in})	2.5 {0.098} (or 10 nicks or more)
Minimum projection of the oil seal			(mm {in})	0.5 {0.02}
ECCENTRIC SHAFT
Main bearing oil clearance		(mm {in})	Standard	Without stopper screw: 0.045—0.085 {0.0022—0.0029} With stopper screw: 0.055—0.075 {0.0018—0.0033}
			Maximum	0.1 {0.0039 in}
Rotor bearing oil clearance		(mm {in})	Standard	0.06—0.08 {0.0024—0.0030}
			Maximum	0.1 {0.0039}
Runout		(mm {in})	Standard	0.02 {0.0008}
			Maximum	0.06 {0.0024}
End play		(mm {in})	Standard	0.04—0.09 {0.0016—0.0035}
ECCENTRIC SHAFT BYPASS VALVE
Minimum projection	(mm {in})			6 {0.24}
OIL PUMP
Body clearance (Type A)	(mm {in})		Standard	0.20—0.25 {0.0079—0.0098}
			Maximum	0.3 {0.0118}
Tip clearance (Type A)		(mm {in})	Standard	0.03—0.12 {0.0012—0.0047}
			Maximum	0.15 {0.0059}
Side clearance (Type A)		(mm {in})	Standard	0.03—0.125 {0.0012—0.0049}
			Maximum	0.15 {0.0059}