NO.2 MIL ILLUMINATES [13B-MSP]

id0103f2804000

2

MIL ILLUMINATES

DESCRIPTION

The MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  PCM illuminates for emission-related concern (DTC is stored in PCM)

•  Instrument cluster malfunction

Note

•  If MIL blinks at steady rate, misfire condition could exist.

2	MIL ILLUMINATES
DESCRIPTION	The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• PCM illuminates for emission-related concern (DTC is stored in PCM) • Instrument cluster malfunction Note • If MIL blinks at steady rate, misfire condition could exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Connect the M-MDS to the DLC-2. Turn the ignition switch to the ON position (Engine off). Retrieve any DTCs. Are there any DTCs displayed?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [13B-MSP].)
1		No	Go to the next step.
2	Inspect between the following wiring harnesses. • PCM terminal 1AM—instrument cluster terminal 1J • PCM terminal 1AI—instrument cluster terminal 1L Are they normal?	Yes	Inspect instrument cluster operation. (See INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE.)
2		No	Repair or the replace wiring harness.
3	• Verify test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If the malfunction remains, inspect the related Service Bulletins and/or On-line Repair Information and perform the repair or diagnosis.