ENGINE CONTROL SYSTEM RELATION CHART [13B-MSP]

id0140g1100600

Item
Input
ECT sensor	×		×	×	×			×	×	×	×	×	×	×	×		×
KS No.1, No.2								×
IAT sensor	×		×		×		×	×	×	×	×						×
MAF sensor			×	×	×			×		×
A/F sensor					×				×	×			×
HO2S					×					×			×
Generator (Terminal P: stator coil)			×					×									×
BARO sensor (built into PCM)			×		×		×		×	×	×
Battery			×		×		×	×			×	×	×				×
Oil pressure sensor	×										×	×
PCM temperature sensor (built into PCM)														×			×
TP sensor No.1, No.2	×		×		×			×						×
APP sensor No.1, No.2			×		×
APV position sensor				×
Eccentric shaft position sensor			×	×	×	×	×	×	×	×	×	×	×	×			×
CPP switch (MT)			×		×			×						×
Neutral switch (MT)			×		×			×						×			×
Brake signal			×		×			×									×
Refringerant pressure switch (middle)			×											×	×
A/C switch			×		×			×						×	×
Ignition switch	×	×	×	×	×	×	×										×
Cruise control switch (vehicles equipped with cruise control switch)			×					×
CAN			×		×			×	×	×				×		×	×	×
Output
Main relay	×
Drive-by-wire relay		×
Throttle valve actuator			×
VDI solenoid valve (13B-MSP(high power))				×
VFAD solenoid valve (with VFAD)				×
SSV solenoid valve				×
APV motor				×
Fuel injector (FP, FS)					×
Fuel injector (RP, RS)					×
Fuel pump relay						×
Fuel pump speed control relay							×
Ignition coil (T/F, T/R)								×
Ignition coil (L/F,L/R)								×
Air solenoid valve									×
Air pump relay									×
Purge solenoid valve										×
Metering oil pump driver											×
Metering oil pump No.1, No.2											×
OCV												×
A/F sensor heater													×
HO2S heater													×
A/C relay														×
Cooling fan relay No.1, No.2, No.3, No.4, No.5															×
Starter relay																×
Generator (terminal D: field coil)																	×
CAN																		×