ACCELERATOR PEDAL POSITION (APP) SENSOR INSPECTION [13B-MSP]
id0140g1803200
Voltage Inspection
1. Turn the ignition switch to the ON position.
2. Verify that the voltage at PCM terminals 1AO (M-MDS PID: APP1) and 1AP (M-MDS PID: APP2) increases while gradually increasing the accelerator pedal opening angle according to the accelerator pedal opening angle.
3. Verify that the voltage at PCM terminals 1AO (M-MDS PID: APP1) and 1AP (M-MDS PID: APP2) is as indicated in the table.
APP sensor output voltage
|
Measurement condition |
PCM terminal (M-MDS PID) |
|
|---|---|---|
|
1AO (APP1) |
1AP (APP2) |
|
|
When the accelerator pedal is depressed.
|
3.78—3.93 V
|
3.23—3.38 V
|
|
When the accelerator pedal is released.
|
1.555—1.655 V
|
1.005—1.105 V
|