AUTOMATIC TRANSMISSION ON-BOARD DIAGNOSTIC FUNCTION [SJ6A-EL]

id050208811100

DTC Reading Procedure

1.  Perform necessary vehicle preparation and visual inspection.

2.  Connect the M-MDS to the DLC-2.

ar8wzw00000138

ar8wzw00000139

3.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select "Self Test".

2.  Select "Modules".

3.  Select "TCM".

•  When using the PDS (Pocket PC)

1.  Select "Module Tests".

2.  Select "TCM".

3.  Select "Self Test".

4.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

5.  After completion of repairs, clear all DTCs stored in the TCM. (See AFTER REPAIR PROCEDURE [SJ6A-EL].)