TURBINE SENSOR INSPECTION [SJ6A-EL]

id051311251900

Caution

•  Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that water or foreign material do not enter the connector when disconnecting it.

1.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)

2.  Remove the battery cover.

3.  Disconnect the negative battery cable.

4.  Disconnect the turbine sensor connector.

ar8wzw00001200

Caution

•  Do not apply a shock in the turbine sensor.

•  Do not damage the terminals.

5.  Measure the resistance between the turbine sensor terminals.

e5u513zw5061

•  If there is any malfunction, replace the turbine sensor. (See TURBINE SENSOR REMOVAL/INSTALLATION [SJ6A-EL].)

6.  Connect the turbine sensor connector.

7.  Connect the negative battery cable.

8.  Install the battery cover.

9.  Install the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)