HVAC SPECIFICATIONS [FULL-AUTO AIR CONDITIONER]

id0700001003a1

Basic System

Item				Specification
Heating capacity	(kW {kcal/h})			4.400 {3,784}
Cooling capacity	(kW {kcal/h})			4.500 {3,870}
Refrigerant	Type			R‐134a
	Regular amount (approx. quantity)		(g {oz})	430 {15.2}
A/C compressor	Type			Scroll type
	Discharge capacity		(ml {cc, fl oz})	60 {60, 2.03}
	Max. allowable speed		(rpm)	9,000
	Lube oil	Type		DENSO OIL8
		Sealed volume (approx. quantity)	(ml {cc, fl oz})	60 {60, 2.03}
Condenser	Type			Multiflow (sub-cooling type)
	Radiated heat		(kW {kcal/h})	7.0 {6,020}
	Receiver/drier capacity		(ml {cc, fl oz})	190 {190, 6.42}
	Desiccant			XH-9
Expansion valve	Type			External pressure equalizer
Evaporator	Type			Double‐tank drawn cup
Temperature control				Reheat full air mix type

Control System

Item			Specification
Airflow volume (during heater operation)	Blower motor	(m3/h)	300
Electricity consumption (during heater operation)	Blower motor	(W)	220
Airflow volume (during air conditioner operation)	Blower motor	(m3/h)	460
Electricity consumption (during air conditioner operation)	Blower motor	(W)	220
	Magnetic clutch	(W)	35
Magnetic clutch clearance (approx. quantity)		(mm {in})	0.20—0.45 {0.008—0.017}
Fan type	Blower motor		Sirocco fan
Refrigerant pressure switch	Type		Triple-pressure
	Operating pressure
	(MPa {kgf/cm2, psi})
Sensor	Solar radiation sensor		Photodiode
	Ambient temperature sensor		Thermistor
	Cabin temperature sensor
	Evaporator temperature sensor
Actuator	Air intake actuator		Sliding contact type
	Air mix actuator		Potentiometer type
	Airflow mode actuator