DTC 06

id070200802300

DTC 06	Cabin temperature sensor system inspection
POSSIBLE CAUSE	•  Connector or terminal malfunction •  Open circuit in wiring harness between A/C amplifier connector terminals 2J and 2N •  Short to ground in wiring harness between A/C amplifier connector terminals 2J and 2N •  Cabin temperature sensor malfunction

Diagnostic Procedure

STEP	INSPECTION		ACTION
1	INSPECT CABIN TEMPERATURE SENSOR CIRCUIT •  Is the resistance between terminals 2J and 2N of the A/C amplifier connector (16-pin) as indicated below? ―  0.35—120 kilohms	Yes	Inspect the connection at the A/C amplifier connector (16-pin).
		No	Go to the next step.
2	INSPECT CABIN TEMPERATURE SENSOR •  Inspect the cabin temperature sensor. (See CABIN TEMPERATURE SENSOR INSPECTION [FULL-AUTO AIR CONDITIONER].) •  Is it normal?	Yes	Repair the wiring harness.
		No	Replace the cabin temperature sensor. (See CABIN TEMPERATURE SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)