DTC 19, 22

id070200812300

DTC 19, 22

Air mix actuator, airflow mode actuator (+5 V power supply) system inspection

POSSIBLE CAUSE

•  Open circuit in wiring harness between A/C amplifier connector terminal 2P and airflow mode actuator connector terminal A

•  Short to ground in wiring harness between A/C amplifier connector terminal 2P and airflow mode actuator connector terminal A

•  Short to ground in wiring harness between A/C amplifier connector terminal 2P and air mix actuator connector terminal C (L.H.D.), A (R.H.D.)

DTC 19, 22	Air mix actuator, airflow mode actuator (+5 V power supply) system inspection
POSSIBLE CAUSE	• Open circuit in wiring harness between A/C amplifier connector terminal 2P and airflow mode actuator connector terminal A • Short to ground in wiring harness between A/C amplifier connector terminal 2P and airflow mode actuator connector terminal A • Short to ground in wiring harness between A/C amplifier connector terminal 2P and air mix actuator connector terminal C (L.H.D.), A (R.H.D.)

Diagnostic Procedure

STEP	INSPECTION		ACTION
1	INSPECT +5 V POWER SUPPLY CIRCUIT FOR OPEN CIRCUIT • Disconnect the A/C amplifier connector (16-pin) and the airflow mode actuator connector. • Is there continuity between A/C amplifier connector (16-pin) terminal 2P and airflow mode actuator connector terminal A?	Yes	Go to the next step.
1		No	Repair the wiring harness.
2	INSPECT +5 V POWER SUPPLY CIRCUIT FOR SHORT TO GROUND • Is there a short circuit to ground in the wiring harness between A/C amplifier connector (16-pin) terminal 2P and airflow mode actuator connector terminal A?	Yes	Repair the wiring harness.
2		No	Go to the next step.
3	INSPECT +5 V POWER SUPPLY CIRCUIT FOR SHORT TO GROUND • Is there a short circuit to ground in the wiring harness between A/C amplifier connector (16-pin) terminal 2P and air mix actuator connector terminal C (L.H.D.), A (R.H.D.)?	Yes	Repair the wiring harness.
3		No	The system is normal at present. (Clear the past malfunction from memory.)