AIR INTAKE CONTROL OPERATION [FULL-AUTO AIR CONDITIONER]
id0740a1103500
Order of Priority for Controls
• The air intake control operates according to the following order of priority.
-
1. Air intake manual control
2. Defroster correction
3. MAX HOT and MAX COLD correction
4. Air intake automatic control
Air Intake Automatic Control
• The A/C amplifier calculates the air intake actuator stop position (air intake mode) based on the target temperature operating the actuator.
• If the target temperature is high, the actuator stop position is set to FRESH, if the temperature is low, it is set to REC.
Correction
Defroster correction
• Sets the air intake at FRESH when the airflow mode is set to DEFROSTER, HEAT/DEF for improved defrosting.
MAX HOT, MAX COLD correction
• When the set temperature is at MAX HOT*1, the air intake actuator is at FRESH, when it is at MAX COLD*2, it is set to REC.
*1 : 29.0 (European (L.H.D. U.K.) specs.), 32.0 (Australian specs.)
*2 : 15.0 (European (L.H.D. U.K.) specs.), 18.0 (Australian specs.)
Air Intake Manual Control
• The air intake mode can be switched by operation of the REC/FRESH switch.
|
Air intake mode
|
REC/FRESH switch operation
|
|
FRESH
|
Sets to FRESH when REC/FRESH switch is turned on during REC mode.
|
|
REC
|
Sets to REC when REC/FRESH switch is turned on during FRESH mode.
|
