AIR MIX ACTUATOR INSPECTION [MANUAL AIR CONDITIONER]

id0740a2802500

1.  Connect battery positive voltage to air mix actuator terminal F (or G), and ground to terminal G (or F), and then verify that the air mix actuator operates as shown in the table.

ar8uuw00003418

•  Apply the external power supply.

•  If the operation condition is not normal, replace the air mix actuator.

Terminal		Air mix actuator operation
F	G
B+	Ground	COLD→HOT
Ground	B+	HOT→COLD

2.  Verify that the resistance between terminals A and E, and C and E matches the air mix actuator operation as shown in the graph.

ar8uuw00002215

•  If the operation condition and resistance are not normal, replace the air mix actuator.

3.  Install the air mix actuator with the lever position shown in the figure.

ar8uuw00003417