ON-BOARD DIAGNOSTIC SYSTEM FUNCTION


id080200300300


Self-diagnostic Function


Malfunction detection function

•  Detects overall malfunctions in the air bag system-related parts.


Fail-safe function

•  If the SAS control module performance/function cannot be maintained due to any cause, the fail-safe function stops air bag system control and flashes the air bag system warning light to prevent the air bags from operating (deploying) accidentally.


Memory function

•  Stores malfunctions in the air bag system-related parts detected by the malfunction detection function, and the stored malfunction contents are not cleared even if the ignition switch is turned to the LOCK position or the negative battery cable is disconnection.


Display function

•  When the malfunction detection function detects a malfunction, the air bag system warning light illuminates to advise the driver. Using the external tester communication function, DTCs can be output to the DLC-2 via the CAN.

DTC

System malfunction location

M-MDS display

Air bag system warning light

Flashing pattern

Priority ranking

B1231
13
3
SAS control module activation (deployment) control freeze
B1342
12
2
SAS control module (internal circuit abnormal)
Continuously illuminated
1
SAS control module (DTC 12 detection circuit malfunction)
14
4
Deployment prohibited because configuration is not set
B1426
57
23
Seat belt warning light circuit short to power supply
B1427
Seat belt warning light circuit open
B1869
Continuously illuminated
1
Air bag system warning light circuit open
Does not illuminate
Air bag system warning light circuit short to body ground
B1870
Continuously illuminated
1
Air bag system warning light circuit short to power supply
B1877
33
13
Driver-side pre-tensioner seat belt circuit resistance high
B1878
Driver-side pre-tensioner seat belt circuit short to power supply
B1879
Driver-side pre-tensioner seat belt circuit short to body ground
B1881
34
12
Passenger-side pre-tensioner seat belt circuit resistance high
B1882
Passenger-side pre-tensioner seat belt circuit short to power supply
B1883
Passenger-side pre-tensioner seat belt circuit short to body ground
B1884
18
21
Passenger air bag deactivation (PAD) indicator open or short to body ground
B1885
33
13
Driver-side pre-tensioner seat belt circuit resistance low
B1886
34
12
Passenger-side pre-tensioner seat belt circuit resistance low
B1890
18
21
Passenger air bag deactivation (PAD) indicator circuit short to power supply
B1913
19
11
Driver-side air bag module circuit short to body ground
21
10
Passenger-side air bag module (inflator No.1) circuit short to body ground
B1916
19
11
Driver-side air bag module circuit short to power supply
B1925
21
10
Passenger-side air bag module (inflator No.1) circuit short to power supply
B1932
19
11
Driver-side air bag module circuit resistance high
B1933
21
10
Passenger-side air bag module (inflator No.1) circuit resistance high
B1934
19
11
Driver-side air bag modulecircuit resistance low
B1935
21
10
Passenger-side air bag module (inflator No.1) circuit resistance low
B1992
22
15
Driver-side side air bag module circuit short to power supply
B1993
Driver-side side air bag module circuit short to body ground
B1994
Driver-side side air bag module circuit resistance high
B1995
Driver-side side air bag module circuit resistance low
B1996
23
14
Passenger-side side air bag module circuit short to power supply
B1997
Passenger-side side air bag module circuit short to body ground
B1998
Passenger-side side air bag module circuit resistance high
B1999
Passenger-side side air bag module circuit resistance low
B2229
21
10
Passenger-side air bag module (inflator No.2) circuit short to body ground
B2231
21
10
Passenger-side air bag module (inflator No.2) circuit short to power supply
B2233
21
10
Passenger-side air bag module (inflator No.2) circuit resistance high
B2235
21
18
Passenger-side air bag module (inflator No.2) circuit resistance low
B2296
42
9
Crash zone sensor (communication error, internal circuit abnormal)
B2434
51
19
Driver-side front buckle switch circuit short to ground
B2435
Driver-side front buckle switch circuit resistance not within specification
B2438
52
20
Passenger-side front buckle switch circuit short to ground
B2439
Passenger-side front buckle switch circuit resistance not within specification
B2444
43
8
Driver-side side air bag sensor (internal circuit abnormal)
B2445
44
7
Passenger-side side air bag sensor (internal circuit abnormal)
B2477
54
5
Configuration error
B2691
51
19
Driver-side front buckle switch circuit open or short to power supply
B2692
52
20
Passenger-side front buckle switch circuit open or short to power supply
B2773
24
17
Driver-side curtain air bag module circuit resistance low
B2774
Driver-side curtain air bag module circuit resistance high
B2775
Driver-side curtain air bag module circuit short to body ground
B2776
Driver-side curtain air bag module circuit short to power supply
B2777
25
16
Passenger-side curtain air bag module circuit resistance low
B2778
Passenger-side curtain air bag module circuit resistance high
B2779
Passenger-side curtain air bag module circuit short to body ground
B2780
Passenger-side curtain air bag module circuit short to power supply
B2867
31
6
Poor connection of any SAS control module connectors
U2017
43
8
Driver-side side air bag sensor (communication error)
U2018
44
7
Passenger-side side air bag sensor (communication error)


PID/Data Monitoring Function

•  By using the PID/data monitoring function, the monitored item of the input/output signal, as set on the SAS control module, can be freely selected and read out in real-time.
•  The Mazda Modular Diagnostic System (M-MDS) is used to read out PID/data monitor information.

PID/data monitor table

PID name (definition)

Unit/Condition

Operation Condition (Reference)

Terminal

CCNT_RCM
(Number of continuous DTCs)
•  DTCs detected: 1—255
•  No DTCs detected: 0
D_CRSH_S
(Driver-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
2Z, 2AA
DABAGR
(Driver-side air bag module resistance)
Ohms
Under any condition: 1.5—3.7 ohms
1S, 1V
D_PTENSFLT
(Driver-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2P, 2S
DR_BUKL
(Driver-side buckle switch status)
Buckled/
Unbuckled
•  Driver-side buckle switch on: Buckled
•  Driver-side buckle switch off: Unbuckled
2T
DR_CURTN
(Driver-side curtain air bag module resistance)
Ohms
Under any condition: 1.4—3.2 ohms
2V, 2Y
DR_PTENS
(Driver-side pre-tensioner seat belt resistance)
Ohms
Under any condition: 1.5—3.1 ohms
2P, 2S
DS_AB
(Driver-side side air bag module resistance)
Ohms
Under any condition: 1.4—3.2 ohms
2M, 2O
DS_AB_ST
(Driver-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2M, 2O
DS_CURT_ST
(Driver-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2V, 2Y
DS1_STAT
(Driver-side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1S, 1V
DSB_P_ST
(Driver-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2P, 2S
FNT_CRSH_S
(Crash zone sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
1B, 1C
OD_D_CRSH
(Driver-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
2Z, 2AA
OD_D_CURT
(Driver-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2V, 2Y
OD_DAB1_ST
(Driver-side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1S, 1V
OD_DSAB_ST
(Driver-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2M, 2O
OD_F_CRSH
(Crash zone sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
1B, 1C
OD_F_CRSH
(Passenger-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
2B, 2C
OD_P_CURT
(Passenger-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2A, 2D
OD_PAB1_ST
(Passenger-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1M, 1P
OD_PAB2_ST
(Passenger-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1A, 1D
OD_PSAB_ST
(Passenger-side side air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2I, 2L
P_ABAGR2
(Passenger-side air bag module (inflator No.2) resistance)
Ohms
Under any condition: 1.4—2.9 ohms
1A, 1D
P_PTENSFLT
(Passenger-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2G, 2J
PABAGR
(Passenger-side air bag module (inflator No.1) resistance)
Ohms
Under any condition: 1.4—2.9 ohms
1M, 1P
P_CRSH_S
(Passenger-side side air bag sensor status)
OK/
COMM_FAIL/
INT_FAIL
•  Sensor normal: OK
•  Sensor communication error: COMM_FAIL
•  Sensor internal circuit abnormal: INT_FAIL
2B, 2C
PS_AB
(Passenger-side side air bag module resistance)
Ohms
Under any condition: 1.4—3.2 ohms
2I, 2L
PS_AB_ST
(Passenger-side side air bag sensor circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2I, 2L
PS_BUKL
(Passenger-side buckle switch status)
Buckled/
Unbuckled
•  Passenger-side buckle switch on: Buckled
•  Passenger-side buckle switch off: Unbuckled
2H
PS_CURTN
(Passenger-side curtain air bag module resistance)
Ohms
Under any condition: 1.4—3.2 ohms
2A, 2D
PS_CURT_ST
(Passenger-side curtain air bag module circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
2A, 2D
PS_PTENS
(Passenger-side pre-tensioner seat belt resistance)
Ohms
Under any condition: 1.5—3.1 ohms
2G, 2J
PS1_STAT
(Passenger-side air bag module (inflator No.1) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1M, 1P
PS2_STAT
(Passenger-side air bag module (inflator No.2) circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Air bag module circuit resistance low: SQ_LOWRES
1A, 1D
PSB_P_ST
(Passenger-side pre-tensioner seat belt circuit status)
NORMAL/
OPEN/
SHRT_GND/
SHRT_B+/
SQ_LOWRES
•  Related wiring harness normal: NORMAL
•  Related wiring harness circuit open: OPEN
•  Related wiring harness short to ground: SHRT_GND
•  Related wiring harness short to power supply: SHRT_B+
•  Pre-tensioner seat belt circuit resistance low: SQ_LOWRES
2G, 2J
RCM_VOLT
(IG1 voltage)
V
•  Ignition switch is at ON: B+
•  Other: 0
1W
PSB_P_ST
(Passenger-side pre-tensioner seat belt circuit status)
Forward/
Rearward
•  Front seat front position: Forward
•  Front seat rear position: Rearward
2W, 2X