AIR BAG SYSTEM OUTLINE


id081000100100

•  The air bag system is a device that supplements the passenger restraint function of the seat belts. The air bag system will not have the designed effect if the seat belts are not worn properly.
•  The air bag system is composed of the following parts:

Item

Outline

SAS control module
•  2-step deployment control has been added to the front air bag system (passenger-side) deployment control.
•  Recognizes actually equipped air bag module or pre-tensioner seat belt based on module configuration.
Crash zone sensor
•  Detects degree of impact, converts to an electrical signal, and sends the signal to the SAS control module. For operation, refer to SAS control module and Air bag module deployment operation. (See SAS CONTROL MODULE CONSTRUCTION/OPERATION)
Side air bag sensor
Driver-side air bag module
•  Adopted to improve safety in frontal collisions.
Passenger-side air bag module
•  Dual inflator, inflator 1 and inflator 2, has been adopted in accordance with the front air bag system 2-step deployment control.
Side air bag module
•  Chest-protection type side air bag module is used in accordance with the adoption of the curtain air bag module.
Curtain air bag module
•  Adopted to improve safety in lateral collisions.
Pre-tensioner seat belt
•  Ball-type pre-tensioner seat belt has been adopted.
PAD switch
•  PAD switch has been adopted enabling optional deactivation of passenger-side air bag module, passenger-side side air bag module, and passenger-side pre-tensioner seat belt.
PAD indicator
•  PAD indicator has been adopted to inform driver and front passenger of the deployment standby status of the passenger-side air bag module, passenger-side side air bag module, and passenger-side pre-tensioner seat belt.
Air bag system warning light
•  LED has been adopted.
Seat belt warning light