STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

id0902f6358300

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

With RDS (radio date system)

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the audio power to OFF.

3.  While pressing the POWER/VOLUME switch, simultaneously press the FM 1/2 switch and the MEDIA switch for 2 s or more.

ar8uuw00001068

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK switch.

4.  To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.

Without RDS (radio date system)

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the audio power to OFF.

3.  While pressing the POWER/VOLUME switch, simultaneously press the FM 2 switch and the MEDIA switch for 2 s or more.

ar8wzw00000903

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK switch.

4.  To stop the on-board diagnostic test mode, turn the ignition switch to the LOCK position.