STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [HANDS-FREE TELEPHONE (HF/TEL) SYSTEM]

id0902g0358300

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

With Audio Unit

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the audio unit power to OFF.

3.  While pressing the POWER/VOLUME switch, simultaneously press the Preset switch 1 and the Preset switch 6 for 3 s or more.

ar8uuw00001084

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK switch (+) or (-).

Current malfunction

ar8uuw00001102

4.  To stop the on-board diagnostic test mode, switch the ignition to the LOCK position.

With Car-navigation Unit

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the audio power to OFF.

3.  While pressing the POWER/VOLUME switch, simultaneously press the DISP switch for 2 s or more.

ar8uuw00001066

4.  Press the Detail switch.

am6zzw00002487

5.  To stop the on-board diagnostic test mode, switch the ignition to the LOCK position.