•  Manual-open/close and auto-open/close can be performed for driver’s seat window by operation of the power window main switch.

•  Manual-open/close can be performed for passenger’s seat window by operation of the switch at the passenger’s seat.

•  By locking the power cut switch, the circuit for each switch at the front and rear passenger seats is not grounded, and operation of the switches is disabled.

•  A built-in P/W CM (power window control module) controls the driver's power window system based on the pulse signals from the driver's power window motor.

•  The position and movement direction of the window is stored in P/W CM at the time of vehicle delivery. Due to this, the initial position setting must be performed after performing any of the following procedures.