REAR PILLAR TRIM REMOVAL/INSTALLATION

id091700809000

1.  Remove the rear seat. (See REAR SEAT REMOVAL/INSTALLATION.)

2.  Remove the inner scuff plate. (See INNER SCUFF PLATE REMOVAL/INSTALLATION.)

3.  Remove the tire house trim. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

4.  Remove the cap using a fastener remover.(Vehicles with curtain air bags)

chu0917w116

5.  Remove the bolt. (Vehicles with curtain air bags)

6.  Remove the fastener.

7.  Detach clips A and locator pin B, using a fastener remover, and remove the rear pillar trim.

8.  Install in the reverse order of removal.