COMBINATION SWITCH DISASSEMBLY/ASSEMBLY

id091800802600

Caution

• If the disc on the combination switch is deformed or has foreign material adhering to it, performance of the steering angle sensor may be reduced, causing abnormal operation. When handling the combination switch, be careful not to deform the disc and make sure there is no foreign material on it.

1. Remove the combination switch. (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

2. Disassemble in the order indicated in the table.

ar8wzw00000957

1

Screw

2

Wiper and washer switch (vehicles with wiper and washer switch on right side) / Light switch (vehicles with light switch on right side)

3

Light switch (vehicles with light switch on left side) / Wiper and washer switch (vehicles with wiper and washer switch on left side)

4

Body

3. Assemble in the reverse order of disassembly.

1	Screw
2	Wiper and washer switch (vehicles with wiper and washer switch on right side) / Light switch (vehicles with light switch on right side)
3	Light switch (vehicles with light switch on left side) / Wiper and washer switch (vehicles with wiper and washer switch on left side)
4	Body