ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION (DYNAMIC STABILITY CONTROL)
id040200181520
• The active command modes function is used for optionally selecting active command modes items of input/output parts preset in the DSC HU/CM, and to operate them regardless of CM control.
• To protect the hydraulic unit interior, operate output related parts for only 10 s or less when using the active command modes function.
Active Command Modes Table
|
Command name
|
Output part name
|
Operation
|
Operation condition
|
|
LATACCEL
|
Combined sensor (lateral acceleration) initialization start-up
|
TRUE/FALSE
|
Ignition switch at ON
|
|
LF_DSC_V
|
LF stability control valve
|
On/Off
|
|
LF_INLET
|
LF inlet solenoid valve
|
|
LF_OUTLET
|
LF outlet solenoid valve
|
|
LF_TC_VLV
|
LF traction control valve
|
|
LR_INLET
|
LR inlet solenoid valve
|
|
LR_OUTLET
|
LR outlet solenoid valve
|
|
PMP_MOTOR
|
Pump motor
|
|
RF_DSC_V
|
RF stability control valve
|
|
RF_INLET
|
RF inlet solenoid valve
|
|
RF_OUTLET
|
RF outlet solenoid valve
|
|
RF_TC_VLV
|
RF traction control valve
|
|
RR_INLET
|
RR inlet solenoid valve
|
|
RR_OUTLET
|
RR outlet solenoid valve
|
|
SAS_CAL
|
Steering angle sensor initialization start-up
|
TRUE/FALSE
|
|
YAWRATE
|
Combined sensor (yaw rate) initialization start-up
|
On/Off
|