ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION (ELECTRIC POWER STEERING)

id0602001012a1

• The PID/data monitor function is used for optionally selecting input/output signal monitor items pre-set in the EPS control module and reading them out in real-time.

PID/DATA MONITOR TABLE

Command name

(WDS or equivalent)

Input/output part name

Unit/operation

(WDS or equivalent)

B+
Battery positive voltage
V
CCNT
DTC (amount detected)
-
EPS_MTR
EPS motor
A
EPSLAMP
EPS warning light
ON/OFF
RPM
Engine speed signal
RPM
TRQ_S_CORR
Torque sensor neutral position
NM
TRQ_SENS
Torque sensor
NM
VSS
Vehicle speed signal
KPH/MPH