HYDRAULIC LASH ADJUSTER (HLA) INSPECTION

1. Measure the diameter of each HLA bore.

16.018-16.057 mm {0.63063-0.63216 in}

2. Measure the diameter of each HLA.

15.988-16.000 mm {0.62945-0.62992 in}

3. Calculate the clearance between the HLA and the related HLA bores.

• If the clearance exceeds the maximum clearance, replace the cylinder head or the HLA.

0.018-0.069 mm {0.0008-0.0027 in}

0.16 mm {0. 0063 in}