LOW AND REVERSE BRAKE INSPECTION
BUE051719500A11
Drive Plate Inspection
1. Measure the facing thickness in three places, and determine the average of the three readings.
-
• If not within the specification, replace the drive plates.
-
Thickness
-
Standard: 1.6 mm {0.063 in}
-
Minimum: 1.5 mm {0.059 in}
Spring and Retainer Inspection
1. Measure the free length of each spring and inspect for deformation.
-
• If not within the specifications, replace the spring and retainer.
-
Free length
-
18.07 mm {0.7114 in}