2-3 ACCUMULATOR ASSEMBLY

1. Apply ATF to the large and small seal ring.

2. Install the large and small seal ring to the 2-3 accumulator piston.

3. Apply ATF to a new O-ring and install it onto the stopper plug.

O-ring inner diameter

26.8 mm {1.06 in}

Caution

• Apply even pressure to the perimeter of the accumulator pistons and the stops to avoid damaging the O-ring and seal rings while installing.

4. Install the accumulator piston and 2-3 accumulator spring.

5. Install the stopper plug and snap ring while holding in the stopper plug.