SCHEDULED MAINTENANCE

id000000801200

Scheduled Maintenance Table for Australia, New Zealand

Maintenance Interval

Number of months or kilometers, whichever comes first

Months

6

12

18

24

30

36

42

48

54

60

66

72

78

84

90

96

×1000 km

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

Engine valve clearance (for L3 engine)

Audible inspect every 120,000 km, if noisy, adjust

Drive belts ^*1

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Engine oil ^*2

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Engine oil filter ^*2

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

R

Cooling system

I

I

I

I

I

I

I

I

Engine coolant

FL22 type ^*3

Replace at first 200,000 km or 10 years;

after that, every 100,000 km or 5 years

Others

Replace at first 80,000 km or 4 years; after that, every 2 years

Air cleaner element ^*4

for L3 engine

C

R

C

R

C

for AJ (3.0L Duratec) engine

I

R

I

R

I

R

I

R

Spark plugs

for L3 engine

Replace every 100,000 km

for AJ (3.0L Duratec) engine

R

R

R

R

Fuel filter

R

R

R

R

Fuel lines and hoses

I

I

I

I

I

I

I

I

Evaporative system (if installed)

I

I

I

I

I

I

I

I

Battery (for leakage and corrosion)

I

I

I

I

I

I

I

I

Brake lines, hoses and connections

I

I

I

I

I

I

I

I

Brake fluid ^*5

I

I

I

R

I

I

I

R

I

I

I

R

I

I

I

R

Parking brake

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Power brake unit (Brake booster) and hoses

I

I

I

I

I

I

I

I

Disc brakes

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Power steering fluid, lines, hoses and connections

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Steering operation and linkages

I

I

I

I

I

I

I

I

Automatic transaxle fluid level

I

I

I

I

I

I

I

I

Automatic transaxle fluid (for AJ (3.0L Duratec) engine)

^*6

Rear differential oil

Replace every 160,000 km ^*6*7

Transfer oil

^*6*7

Front and rear suspension, ball joints and wheel bearing axial play

I

I

I

I

I

I

I

I

Driveshaft dust boots

I

I

I

I

Exhaust system and heat shields

Inspect every 80,000 km

Bolts and nuts on chassis and body

T

T

T

T

T

T

T

T

All electrical system ^*8

I

I

I

I

I

I

I

I

Tire rotation ^*9

Rotate every 10,000 km or 6 months

Tires (including spare tire)(with inflation pressure adjustment)

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

Road test

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

M-MDS check of Vehicle Management and Safety Systems

I

I

I

I

I

I

I

I

Maintenance Interval	Number of months or kilometers, whichever comes first
Engine valve clearance (for L3 engine)	Audible inspect every 120,000 km, if noisy, adjust
Drive belts ^*1	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Engine oil ^*2	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R
Engine oil filter ^*2	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R
Cooling system		I		I		I		I		I		I		I		I
Engine coolant	FL22 type ^*3	Replace at first 200,000 km or 10 years; after that, every 100,000 km or 5 years
Others	Replace at first 80,000 km or 4 years; after that, every 2 years
Air cleaner element ^*4	for L3 engine			C			R			C			R			C
for AJ (3.0L Duratec) engine		I		R		I		R		I		R		I		R
Spark plugs	for L3 engine	Replace every 100,000 km
for AJ (3.0L Duratec) engine				R				R				R				R
Fuel filter				R				R				R				R
Fuel lines and hoses		I		I		I		I		I		I		I		I
Evaporative system (if installed)		I		I		I		I		I		I		I		I
Battery (for leakage and corrosion)		I		I		I		I		I		I		I		I
Brake lines, hoses and connections		I		I		I		I		I		I		I		I
Brake fluid ^*5	I	I	I	R	I	I	I	R	I	I	I	R	I	I	I	R
Parking brake	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Power brake unit (Brake booster) and hoses		I		I		I		I		I		I		I		I
Disc brakes	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Power steering fluid, lines, hoses and connections	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Steering operation and linkages		I		I		I		I		I		I		I		I
Automatic transaxle fluid level		I		I		I		I		I		I		I		I
Automatic transaxle fluid (for AJ (3.0L Duratec) engine)	^*6
Rear differential oil	Replace every 160,000 km ^67
Transfer oil	^67
Front and rear suspension, ball joints and wheel bearing axial play		I		I		I		I		I		I		I		I
Driveshaft dust boots				I				I				I				I
Exhaust system and heat shields	Inspect every 80,000 km
Bolts and nuts on chassis and body		T		T		T		T		T		T		T		T
All electrical system ^*8		I		I		I		I		I		I		I		I
Tire rotation ^*9	Rotate every 10,000 km or 6 months
Tires (including spare tire)(with inflation pressure adjustment)	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Road test	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
M-MDS check of Vehicle Management and Safety Systems		I		I		I		I		I		I		I		I

Chart symbols

I: Inspect: Inspect and clean, repair, adjust, or replace if necessary.

R: Replace

T: Tighten

C: Clean

Remarks

Emission control and related systems

• The ignition and fuel systems are highly important to the emission control system and to efficient engine operation.

All inspections and adjustments must be made by an expert repairer, we recommend an Authorized Mazda Repairer.

• After the prescribed period, continue to follow the described maintenance at the recommended intervals.

• Refer below for a description of items marked* in the maintenance chart.

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated primarily under any of the following conditions, replace the engine oil and oil filter more often than the recommended intervals.

a. Driving in dusty conditions

b. Extended periods of idling or low speed operation

c. Driving for long period in cold temperatures or driving regularly at short distance only

*3: Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.

*4: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.

*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, replace the brake fluid annually.

*6: If the vehicle is operated primarily under any of the following conditions, replace the automatic transaxle fluid, rear differential oil, and transfer oil every 50,000 km.

a. Towing a trailer or using a car-top carrier

b. Driving in dusty sandy, wet conditions

c. Extended periods of idling or low speed operation

d. Repeated short trips of less than 16 km

Otherwise, no replacement is necessary.

*7: If this component has been submerged in water, the oil should be replaced.

*8: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

*9: If the vehicle is operated primarily under any of the following conditions, rotate the tires more often than the recommended intervals.

a. Driving on bumpy roads, gravel roads, snowy roads or dirt roads

b. Driving uphill and downhill frequently

c. Repeated short-distance driving

Scheduled Maintenance Service (Specific Work Required)

• The specific work required for each maintenance item is listed in the following table. (Please refer to the section applicable to the model serviced.)

Maintenance Item

Specific Work Required

ENGINE

Engine valve clearance

Inspect engine vale clearance.

Engine timing belt

Replace engine timing belt.

Engine timing belt auto tensioner

Replace engine timing belt auto tensioner.

Drive belts

Inspect for wear, cracks, fraying and tension.

Engine oil

Replace engine oil and inspect for leakage.

Engine oil filter

Replace engine oil filter and inspect for leakage.

COOLING SYSTEM

Cooling system (Including coolant level adjustment)

Check engine coolant level and quality, and inspect for leakage.

Radiator cap

Inspect radiator cap.

Engine coolant

Replace engine coolant.

FUEL SYSTEM

Idle speed

Check engine idle rpm.

Idle mixture

Inspect the CO and HC concentrations (see W/M).

Choke system

Check system operation.

Air cleaner element

Inspect dirt, oil and damage.

Clean air cleaner element (by blowing air).

Replace air cleaner element.

Fuel filter

Replace fuel filter.

Fuel injection pump inlet filter

Clean fuel injection pump inlet filter.

Fuel lines and hoses

Fuel lines, hoses and connections

Inspect for cracks, leakage and loose connection.

Fuel injection system

Update to injection amount correction with WDS (see W/M).

Update to injection amount correction with M-MDS (see W/M).

Fuel system (Drain water)

Drain water in fuel system.

Diesel particulate filter

Replace diesel particulate filter.

Fuel additive for diesel particulate filter

Fill up fuel additive.

IGNITION SYSTEM

Initial ignition timing

Check initial ignition timing.

Spark plugs

Inspect for wear, damage, carbon, plug gap and high-tension lead condition.

Replace spark plugs.

Ignition cables condition/security

Inspect for damage, condition and connection.

EMISSION CONTROL SYSTEM

Evaporative system

Evaporative emission control system

Check system operation (see W/M), vapor lines, vacuum fitting hoses and connection.

Crankcase emission control system

Check system operation (see W/M), PCV valve, blow-by lines, vacuum fitting hoses and connection.

E.G.R system

Check system operation (see W/M), vacuum fitting hoses and connection.

MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with WDS (see W/M).

MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with M-MDS (see W/M).

Air intake system

Update to MAF correction (see W/M).

Throttle positioner system

Check the diaphragm and system operation, vacuum fitting hoses and connection.

Dash pot

Check system operation.

ELECTRICAL SYSTEM

Battery electrolyte level and specific gravity

Check battery electrolyte level and specific gravity.

Battery condition

Check battery for corroded or loose connections and cracks.

Battery

Check battery for leakage and corrosion.

All electrical system

Lighting system and windshield wipers and washer

Check function of lighting system, windshield wiper (including wiper blade condition), washer and power windows.

Head light alignment

Check head light alignment.

CHASSIS AND BODY

Brake and clutch pedals

Brake pedals

Check pedal height and free play.

Brake fluid

Check brake fluid level and for leakage.

Replace brake fluid.

Clutch fluid

Check Clutch fluid level and for leakage.

Brake lines, hoses and connections

Inspect for cracks, damage, chafing, corrosion, scars, swelling and fluid leakage.

Parking brake

Check parking lever stroke.

Power brake unit and hoses

Power brake unit (Brake booster) and hoses

Check vacuum lines, connections, and check valve for improper attachment, air tightness, cracks chafing and deterioration.

Disc brakes

Inspect caliper for correct operation and fluid leakage, brake pads for wear. Check disc plate condition and thickness. Test for judder and noise.

Drum brakes

Inspect brake drum for wear and scratches: brake lining for wear, peeling and cracks; wheel cylinder for fluid leakage. Test for judder and noise.

Manual steering gear oil

Check manual gear oil level.

Power steering fluid, lines, hoses and connections

Power steering fluid and lines

Check power steering fluid level and lines for improper attachment, leakage, cracks, damage, loose connections, chafing and deterioration.

Steering operation and gear housing

Steering linkages tie rod ends and arms

Steering operation and linkages

Check that the steering wheel has the specified play. Be sure to check for changes, such as excessive play, hard steering or strange noises. Check gear housing and boots for looseness, damage and grease/gear oil leakage. Check ball joint, dust cover and other components for looseness, wear, damage and grease leakage.

Front and rear suspension and ball joints

Front suspension ball joints

Front and rear suspension, ball joints and wheel bearing axial play

Inspect for grease leakage, crack, damage and looseness.

Inspect for grease leakage, crack, damage, looseness and wheel bearing play/noise.

Wheel bearing axial play

Inspect for wheel bearing play/noise.

Manual transmission/transaxle oil

Check manual transmission/transaxle oil level and for leakage.

Replace manual transmission/transaxle oil.

Automatic transmission/transaxle fluid level

Check automatic transmission/transaxle fluid level.

Automatic transmission/transaxle fluid

Replace automatic transmission/transaxle fluid.

Front and rear differential oil

Front differential oil

Front axle oil

Rear differential oil

Rear axle oil

Check front and rear differential oil level and inspect for leakage.

Replace front and rear differential oil.

Transfer oil

Check transfer oil level inspect for leakage.

Replace transfer oil

Front and rear wheel bearing grease

Front wheel bearing grease

Remove wheel bearing and replace wheel bearing grease.

Wheel bearing axial play

Wheel bearing axial play (rear) and lateral play (front)

Inspect wheel bearing play and noise.

Propeller shaft joints

Front propeller shaft joints

Rear propeller shaft joints

Lubricate propeller shaft joints.

Driveshaft dust boots

Inspect for grease leakage, crack, damage and looseness.

Wheel nuts

Tighten wheel nuts.

Bolts and nuts on chassis and body

Bolts and nuts on seats

Tighten bolts and nuts fastening suspension components, members and seat frames.

Body condition (for rust, corrosion and perforation)

Inspect body surface for paint damage, rust, corrosion and perforation.

Exhaust system and heat shields

Exhaust pipe connections

Inspect for damage, corrosion, looseness of connections and gas leakage.

Tire rotation

Rotate tires.

Tires (Including spare tire)(with inflation pressure adjustment)

Check air pressure and inspect tires for tread wear, damage, cracks; and wheels for damage and corrosion.

Flat tire repair kit

Check tire repair fluid expiration date.

Hinges and catches

Lubricate hinges and catches of doors, trunk lid and hood.

Underside of vehicle

Inspect underside of vehicle (floor pans, frames, fuel lines, around exhaust system etc.) for damage and corrosion.

Road test

Check brake operation/clutch operation/steering control/operation of meters and gauges/squeaks, rattles, or unusual noises/engine general performance/emergency locking retractors.

Diagnostic trouble code by WDS

Diagnostic trouble code by M-MDS

Check diagnostic trouble code with WDS (see W/M).

Check diagnostic trouble code with M-MDS (see W/M).

M-MDS check of Vehicle Management and Safety Systems

Check the items below with M-MDS (see W/M).

(1) Retrieve All CMDTCs

(2) PCM function test (except Tribute and diesel engine models)

(3) PCM Input/Output Data Monitor (except Tribute and diesel engine models)

(4) Adviser Comment (except Tribute and diesel engine models)

AIR CONDITIONER SYSTEM

Cabin air filter

Replace cabin air filter.

Maintenance Interval	Number of months or kilometers, whichever comes first
	Months	6	12	18	24	30	36	42	48	54	60	66	72	78	84	90	96
	×1000 km	10	20	30	40	50	60	70	80	90	100	110	120	130	140	150	160
Engine valve clearance (for L3 engine)		Audible inspect every 120,000 km, if noisy, adjust
Drive belts ^*1		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Engine oil ^*2		R	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R
Engine oil filter ^*2		R	R	R	R	R	R	R	R	R	R	R	R	R	R	R	R
Cooling system			I		I		I		I		I		I		I		I
Engine coolant	FL22 type ^*3	Replace at first 200,000 km or 10 years; after that, every 100,000 km or 5 years
Engine coolant	Others	Replace at first 80,000 km or 4 years; after that, every 2 years
Air cleaner element ^*4	for L3 engine			C			R			C			R			C
Air cleaner element ^*4	for AJ (3.0L Duratec) engine		I		R		I		R		I		R		I		R
Spark plugs	for L3 engine	Replace every 100,000 km
Spark plugs	for AJ (3.0L Duratec) engine				R				R				R				R
Fuel filter					R				R				R				R
Fuel lines and hoses			I		I		I		I		I		I		I		I
Evaporative system (if installed)			I		I		I		I		I		I		I		I
Battery (for leakage and corrosion)			I		I		I		I		I		I		I		I
Brake lines, hoses and connections			I		I		I		I		I		I		I		I
Brake fluid ^*5		I	I	I	R	I	I	I	R	I	I	I	R	I	I	I	R
Parking brake		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Power brake unit (Brake booster) and hoses			I		I		I		I		I		I		I		I
Disc brakes		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Power steering fluid, lines, hoses and connections		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Steering operation and linkages			I		I		I		I		I		I		I		I
Automatic transaxle fluid level			I		I		I		I		I		I		I		I
Automatic transaxle fluid (for AJ (3.0L Duratec) engine)		^*6
Rear differential oil		Replace every 160,000 km ^67
Transfer oil		^67
Front and rear suspension, ball joints and wheel bearing axial play			I		I		I		I		I		I		I		I
Driveshaft dust boots					I				I				I				I
Exhaust system and heat shields		Inspect every 80,000 km
Bolts and nuts on chassis and body			T		T		T		T		T		T		T		T
All electrical system ^*8			I		I		I		I		I		I		I		I
Tire rotation ^*9		Rotate every 10,000 km or 6 months
Tires (including spare tire)(with inflation pressure adjustment)		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
Road test		I	I	I	I	I	I	I	I	I	I	I	I	I	I	I	I
M-MDS check of Vehicle Management and Safety Systems			I		I		I		I		I		I		I		I

Maintenance Item	Specific Work Required
ENGINE
Engine valve clearance	Inspect engine vale clearance.
Engine timing belt	Replace engine timing belt.
Engine timing belt auto tensioner	Replace engine timing belt auto tensioner.
Drive belts	Inspect for wear, cracks, fraying and tension.
Engine oil	Replace engine oil and inspect for leakage.
Engine oil filter	Replace engine oil filter and inspect for leakage.
COOLING SYSTEM
Cooling system (Including coolant level adjustment)	Check engine coolant level and quality, and inspect for leakage.
Radiator cap	Inspect radiator cap.
Engine coolant	Replace engine coolant.
FUEL SYSTEM
Idle speed	Check engine idle rpm.
Idle mixture	Inspect the CO and HC concentrations (see W/M).
Choke system	Check system operation.
Air cleaner element	Inspect dirt, oil and damage. Clean air cleaner element (by blowing air). Replace air cleaner element.
Fuel filter	Replace fuel filter.
Fuel injection pump inlet filter	Clean fuel injection pump inlet filter.
Fuel lines and hoses Fuel lines, hoses and connections	Inspect for cracks, leakage and loose connection.
Fuel injection system	Update to injection amount correction with WDS (see W/M). Update to injection amount correction with M-MDS (see W/M).
Fuel system (Drain water)	Drain water in fuel system.
Diesel particulate filter	Replace diesel particulate filter.
Fuel additive for diesel particulate filter	Fill up fuel additive.
IGNITION SYSTEM
Initial ignition timing	Check initial ignition timing.
Spark plugs	Inspect for wear, damage, carbon, plug gap and high-tension lead condition. Replace spark plugs.
Ignition cables condition/security	Inspect for damage, condition and connection.
EMISSION CONTROL SYSTEM
Evaporative system Evaporative emission control system	Check system operation (see W/M), vapor lines, vacuum fitting hoses and connection.
Crankcase emission control system	Check system operation (see W/M), PCV valve, blow-by lines, vacuum fitting hoses and connection.
E.G.R system	Check system operation (see W/M), vacuum fitting hoses and connection. MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with WDS (see W/M). MZR-CD (RF turbo) engine: Update to MAF correction for E.G.R control with M-MDS (see W/M).
Air intake system	Update to MAF correction (see W/M).
Throttle positioner system	Check the diaphragm and system operation, vacuum fitting hoses and connection.
Dash pot	Check system operation.
ELECTRICAL SYSTEM
Battery electrolyte level and specific gravity	Check battery electrolyte level and specific gravity.
Battery condition	Check battery for corroded or loose connections and cracks.
Battery	Check battery for leakage and corrosion.
All electrical system Lighting system and windshield wipers and washer	Check function of lighting system, windshield wiper (including wiper blade condition), washer and power windows.
Head light alignment	Check head light alignment.
CHASSIS AND BODY
Brake and clutch pedals Brake pedals	Check pedal height and free play.
Brake fluid	Check brake fluid level and for leakage. Replace brake fluid.
Clutch fluid	Check Clutch fluid level and for leakage.
Brake lines, hoses and connections	Inspect for cracks, damage, chafing, corrosion, scars, swelling and fluid leakage.
Parking brake	Check parking lever stroke.
Power brake unit and hoses Power brake unit (Brake booster) and hoses	Check vacuum lines, connections, and check valve for improper attachment, air tightness, cracks chafing and deterioration.
Disc brakes	Inspect caliper for correct operation and fluid leakage, brake pads for wear. Check disc plate condition and thickness. Test for judder and noise.
Drum brakes	Inspect brake drum for wear and scratches: brake lining for wear, peeling and cracks; wheel cylinder for fluid leakage. Test for judder and noise.
Manual steering gear oil	Check manual gear oil level.
Power steering fluid, lines, hoses and connections Power steering fluid and lines	Check power steering fluid level and lines for improper attachment, leakage, cracks, damage, loose connections, chafing and deterioration.
Steering operation and gear housing Steering linkages tie rod ends and arms Steering operation and linkages	Check that the steering wheel has the specified play. Be sure to check for changes, such as excessive play, hard steering or strange noises. Check gear housing and boots for looseness, damage and grease/gear oil leakage. Check ball joint, dust cover and other components for looseness, wear, damage and grease leakage.
Front and rear suspension and ball joints Front suspension ball joints Front and rear suspension, ball joints and wheel bearing axial play	Inspect for grease leakage, crack, damage and looseness. Inspect for grease leakage, crack, damage, looseness and wheel bearing play/noise.
Wheel bearing axial play	Inspect for wheel bearing play/noise.
Manual transmission/transaxle oil	Check manual transmission/transaxle oil level and for leakage. Replace manual transmission/transaxle oil.
Automatic transmission/transaxle fluid level	Check automatic transmission/transaxle fluid level.
Automatic transmission/transaxle fluid	Replace automatic transmission/transaxle fluid.
Front and rear differential oil Front differential oil Front axle oil Rear differential oil Rear axle oil	Check front and rear differential oil level and inspect for leakage. Replace front and rear differential oil.
Transfer oil	Check transfer oil level inspect for leakage. Replace transfer oil
Front and rear wheel bearing grease Front wheel bearing grease	Remove wheel bearing and replace wheel bearing grease.
Wheel bearing axial play Wheel bearing axial play (rear) and lateral play (front)	Inspect wheel bearing play and noise.
Propeller shaft joints Front propeller shaft joints Rear propeller shaft joints	Lubricate propeller shaft joints.
Driveshaft dust boots	Inspect for grease leakage, crack, damage and looseness.
Wheel nuts	Tighten wheel nuts.
Bolts and nuts on chassis and body Bolts and nuts on seats	Tighten bolts and nuts fastening suspension components, members and seat frames.
Body condition (for rust, corrosion and perforation)	Inspect body surface for paint damage, rust, corrosion and perforation.
Exhaust system and heat shields Exhaust pipe connections	Inspect for damage, corrosion, looseness of connections and gas leakage.
Tire rotation	Rotate tires.
Tires (Including spare tire)(with inflation pressure adjustment)	Check air pressure and inspect tires for tread wear, damage, cracks; and wheels for damage and corrosion.
Flat tire repair kit	Check tire repair fluid expiration date.
Hinges and catches	Lubricate hinges and catches of doors, trunk lid and hood.
Underside of vehicle	Inspect underside of vehicle (floor pans, frames, fuel lines, around exhaust system etc.) for damage and corrosion.
Road test	Check brake operation/clutch operation/steering control/operation of meters and gauges/squeaks, rattles, or unusual noises/engine general performance/emergency locking retractors.
Diagnostic trouble code by WDS Diagnostic trouble code by M-MDS	Check diagnostic trouble code with WDS (see W/M). Check diagnostic trouble code with M-MDS (see W/M).
M-MDS check of Vehicle Management and Safety Systems	Check the items below with M-MDS (see W/M). (1) Retrieve All CMDTCs (2) PCM function test (except Tribute and diesel engine models) (3) PCM Input/Output Data Monitor (except Tribute and diesel engine models) (4) Adviser Comment (except Tribute and diesel engine models)
AIR CONDITIONER SYSTEM
Cabin air filter	Replace cabin air filter.