OIL STRAINER REMOVAL/INSTALLATION[AJ (3.0L Duratec)]


id0111a2801100


Removal

1.  Remove the oil pan. (See OIL PAN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

2.  Remove the nuts, bolts, and oil strainer.

atraaw00000447


Installation

1.  Install a new O-ring.

atraaw00000448

2.  Install the oil strainer.

atraaw00000449

(1)  Position the oil strainer.
(2)  Install the bolt.
(3)  Tighten the nuts to 15 N·m {153 kgf·cm, 133 in·lbf}, then tighten another 45° using the SST.
atraaw00000450

3.  Install the oil pan. (See OIL PAN REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)