CATALYTIC CONVERTER REMOVAL/INSTALLATION[AJ (3.0L Duratec)]

id0116a1804400

1. Lift up the vehicle.

2. Remove and discard the nuts.

atraaw00000076

3. Remove and discard the gasket.

4. Remove the U-bolt and disconnect the catalytic converter from the hanger, then remove the catalytic converter.

atraaw00000077

5. Install in the reverse order of removal.

• Install a new gasket.

• Install new nuts.

U-bolt tightening torque

40.3—54.7 N·m {4.11—5.57 kgf·m, 29.8—40.3 ft·lbf}

Nut tightening torque

40.3—54.7 N·m {4.11—5.57 kgf·m, 29.8—40.3 ft·lbf}