BATTERY RECHARGING[AJ (3.0L Duratec)]


id0117a1800700

Warning
•  Keep all flames away from the battery, otherwise evaporated gas from the battery fluid may catch fire, and cause serious injury.
•  Remove the battery filler caps when recharging to prevent battery deformation or damage (if equipped).

1.  Remove the battery filler caps (if equipped).

2.  Remove the battery and then place it in a pan of water.

atraaw00000499

3.  Connect a battery charger to the battery and adjust the charging current as follows.

Battery slow charge current
80D26L (55): Approx. 5.5 A (10 h)

4.  After the battery is recharged, verify that the voltage is within the specification and remains at the same value for 1 h or more after the recharging has been completed.

•  If not within the specification, replace the battery.
Standard voltage
12.4 V or more