STARTER REMOVAL/INSTALLATION[AJ (3.0L Duratec)]

id0119a1800200

Warning

•  Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

•  When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

1.  Remove the battery. (See BATTERY REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

2.  Remove the air cleaner. (See AIR CLEANER REMOVAL/INSTALLATION[AJ (3.0L Duratec)].)

3.  Position the selector cable and selector cable bracket component out of the way.

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

atraaw00000532

1	Terminal B cable
2	Terminal S connector
3	Starter