CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION[AJ (3.0L Duratec)]

id0140a1800600

1. Disconnect the negative battery cable.

2. Lift up the vehicle.

3. Remove the front lower splash shield installation bolts.

atraaw00000161

4. Remove the front lower splash shield.

5. Disconnect the CKP sensor connector.

atraaw00000162

6. Remove the CKP sensor installation bolts.

7. Remove the CKP sensor.

8. Install in the reverse order of removal.

CKP sensor installation bolt tightening torque.

8—12 N·m {82—122 kgf·cm, 71—106 in·lbf}

Front lower splash shield installation bolt tightening torque

6.9—9.8 N·m {70—100 kgf·cm, 61—86 in·lbf}

Front lower splash shield installation nut tightening torque

8.9—12.7 N·m {90—130 kgf·cm, 67.8—112 in·lbf}