PCM CONFIGURATION[AJ (3.0L Duratec)]

id0140a1802600

1.  Connect the M-MDS to DLC-2.

atraaw00000178

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (notebook PC)

1.  Select the “Module Programming”.

•  When using the PDS (pocket PC)

1.  Select “Programming”.

2.  Select “Module Programming”.

3.  Then, select the “Programmable Module Installation”, “PCM” from the screen menu.

4.  Retrieve DTCs by the M-MDS, then verify that there in no DTC present.

•  If a DTC is present, perform the applicable DTC inspection.