ENGINE COOLANT TEMPERATURE (ECT) SENSOR REMOVAL/INSTALLATION[L3]


id0140a7801900

1.  Disconnect the negative battery cable.

2.  Remove the splash shield (LH).

3.  Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT[L3].)

4.  Disconnect the ECT sensor connector.

5.  Remove the ECT sensor using the SST.

atraaw00002520

6.  Install in the reverse order of removal.

Tightening torque
10—14 N·m {102—142 kgf·cm, 89—123 in·lbf}