REAR WHEEL ALIGNMENT

id021100800300


Specification (Unloaded)*1

Item

Specification

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe‐in
Tire
[Tolerance ±4 {±0.16}]
(mm {in})
1 {0.04}
(degree)
0°05′±0°07′
Camber angle*2 (Reference value)
[Tolerance ±1°]
0°13′08′′
0°10′26′′
0°07′44′′
0°05′06′′
0°02′24′′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Rear Toe Adjustment

1.  Inspect the toe setting using suitable wheel alignment equipment.

atraaw00001829

Note
•  Rock the vehicle to make sure that the suspension is in its normal resting position.

2.  Loosen the LH and RH rear suspension trailing arm and bushing bolt.

3.  Turn the LH and RH adjusting cams simultaneously until the toe is within specification.

atraaw00001830

4.  Tighten the LH and RH rear suspension trailing arm and bushing bolts.

atraaw00001831