RUBBER BUSHING (WHEEL KNUCKLE) REMOVAL/INSTALLATION

id031200800700

Removal/Installation

1.  Remove the wheel knuckle. (See REAR AXLE REMOVAL/INSTALLATION.)

2.  Remove the stop rubber.

3.  Remove the rubber bushing from the wheel knuckle using the SSTs.

atraaw00003336

4.  Install a new rubber bushing to the wheel knuckle using the SSTs.

atraaw00003337

Caution

•  Install the rubber bushing so that the hollow sections are positioned horizontally.

atraaw00003445

5.  Install the stop rubber.

atraaw00003446

Caution

•  Install the stop rubber so that the bridge section is positioned directly above.

6.  Install the wheel knuckle to the vehicle.