CONVENTIONAL BRAKE SYSTEM OUTLINE

id041100100100

Warning

• Blistering or swelling of rubber parts may indicate contamination of the brake fluid by a petroleum-based substance. New rubber parts must be installed in the system if contaminated and the entire hydraulic brake system must be flushed with clean brake fluid to prevent recontamination.

• The conventional brake system consists of the following parts:

― Master cylinder

― Front brake calipers

― Rear brake calipers

― Brake pipes/hoses

• The brake system consists of two circuits, one between LF and RR, and the other between RF and LR, set in an X pattern.