PARAMETER IDENTIFICATION (PID) DATA MONITORING FUNCTION[GF4AX-EL]


id050204100700

•  The PID mode allows access to certain data values, analog and digital input and output, calculations and system state information.

PID/DATA MONITOR AND RECORD Function Table

–: N/A

Monitor item

Definition

Unit/Condition

PCM terminal

GEAR
Gear commanded by module
1/2/3/4
HTM_CNT
Indicates number of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more) operations
HTM_DIS
Indicates travel distance after operation of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more)
km
LINEDES
Target line pressure
Pa
LPS
Pressure control solenoid control signal in PCM
%
1B
SOL 12S
Shift solenoid A control signal in PCM
On/Off
1E
SOL 23S
Shift solenoid B control signal in PCM
On/Off
1F
SOL 32T
3-2 timing solenoid vale control signal in PCM
On/Off
1C
SOL 34S
Shift solenoid C control signal in PCM
On/Off
1G
SOL TCC
TCC control solenoid valve control signal in PCM
On/Off
1H
TCIL
O/D OFF indicator light
On/Off
– 
TCS
O/D OFF switch
On/Off
1O
TFT
Transaxle fluid temperature
°C
1U, 1AE
TFTV
Transaxle fluid signal voltage
V
1U, 1AE
TR
Transaxle range
P/R/N/D/S/L
1J, 1K, 1L, 1N, 1P, 1S
TRD
TR switch [D range]
On/Off
1L
TRL
TR switch [1 range]
On/Off
1K
TRN
TR switch [N position]
On/Off
1S
TRP
TR switch [P position]
On/Off
1N
TRR
TR switch [R position]
On/Off
1J
TRS
TR switch [2 range]
On/Off
1P
TSS
Input/turbine speed
RPM
1M, 1Q