OUTPUT SHAFT SPEED (OSS) SENSOR INSTALLATION[LA4AX-EL (CD4E)]


id051708803500

Note
•  Apply a light coat of petroleum jelly to the O-ring before installation.

1.  Install the OSS sensor.

atraaw00002521

2.  Connect the OSS sensor connector.

3.  Install the front wheel (LH). (See WHEEL AND TIRE REMOVAL/INSTALLATION.)

4.  Lower the vehicle.

5.  Connect the negative battery cable.

6.  Inspect the ATF level and add Mercon® ATF if necessary.

7.  Start the engine and shift the selector lever and pause momentarily in each shift position while depressing the brake pedal. Add ATF if necessary.