HVAC SPECIFICATIONS

id070000100300

Basic System

Item				Specification
Heating capacity	(kW {kcal/h})			4.302 {3,700}
Cooling capacity	(kW {kcal/h})			4.636 {3.987}
Refrigerant	Type			R‐134a
	Regular amount (approx. quantity)		(g {oz})	800 {28.2}
A/C compressor	Lube oil	Type		FD45XG
		Sealed volume (approx. quantity)	(ml {cc, fl oz})	186—228 {186—228, 6.29—7.70}
Condenser	Type			Multiflow
	Radiated heat		(kW {kcal/h})	9.133 {7,854}
	Receiver/drier capacity		(ml {cc, fl oz})	240 {240, 8.11}
	Desiccant			Zeolite
Expansion valve	Type			Block type
Evaporator	Type			Double‐tank drawn cup
Temperature control				Reheat full air mix type

Control System

Item			Specification
Airflow volume (during heater operation)	Blower motor	(m3/h)	300
Airflow volume (during air conditioner operation)	Blower motor	(m3/h)	410
Magnetic clutch clearance		(mm {in})	0.35—0.75 {0.014—0.029}
Fan type	Blower motor		Sirocco fan
Refrigerant pressure switch	Type		Triple-pressure
	Operating pressure
	(MPa {kgf/cm2, psi})
Sensor	Solar radiation sensor		Photodiode
	Ambient temperature sensor		Thermistor
	Cabin temperature sensor
	Evaporator temperature sensor
	Water temperature sensor
Actuator	Air intake actuator		Sliding contact type
	Air mix actuator		Potentiometer type
	Airflow mode actuator