SYMPTOM TROUBLESHOOTING

id080300804000

Note

•  The following may be the cause of trouble if the symptom does not go away after the symptom troubleshooting steps are followed.

―  Simultaneous poor contact at terminal 2Q of SAS control module connector.

―  Simultaneous poor contact at terminal 2V of SAS control module connector.

―  Poor contacts in wiring harness between terminal 2Q of SAS control module connector and ground, and between terminal 2Q and ground at the same time.

―  Poor contacts or short circuits in wiring harness between ABS/ASC 5 A fuse and SAS control module, and between ENG 10 A fuse and SAS control module at the same time.