DTC INSPECTION[IMMOBILIZER SYSTEM (PATS) (AJ (3.0L Duratec))]

id0902g3800200

1.  Connect the M-MDS to the DLC-2.

atraaw00002993

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (notebook PC)

―  Select the “Toolbox” tab.

―  Select “Self Test”.

―  Select “Module”.

―  Select “PCM”.

•  When using the PDS (pocket PC)

―  Select “Module Tests”.

―  Select “PCM”.

―  Select “Self Test”.

3.  Then, select the “Retrieve CMDTCs” and perform procedures according to directions on the M-MDS screen.

4.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

5.  Disconnect the M-MDS.